You are here:
HomeProductsBy Application
Phosphate Coatings, Iron
Iron phosphate coatings applied via spray, immersion, or steam are designed to suit every process, whether you need an iron phosphate or a combination detergent and iron phosphate.
Spray
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Energy-saving and environmentally-friendly CrysCoat 2707 cleans and produces an iron phosphate coating on ferrous and non-ferrous metals.
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Energy saving and environmentally-friendly CrysCoat 2707 FF cleans and produces an iron phosphate coating on ferrous substances. Fluoride-free formula.
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Chem Cote 3015 is best suited for use where the water is of low to moderate hardness; approximately 200 ppm TDS (300 µS/cm) or less. Multi-metal.
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Not only does Chem Cote 3024 clean, it also produces an iron phosphate coating on iron and steel, and prepares aluminum, galvalume, galvanized, galvanneal and other zinc-coated steels for paint.
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Chem Cote 3026 cleans and produces an iron phosphate coating on iron and steel.
Form: Liquid
Apply by: Spray, immersion
Approval(s): Federal Specification TT-C-490, Type ll
CrysCoat 547 is a 5-stage iron phosphate prepaint treatment that provides superior corrosion-resistant coatings on steel substrates.
Form: Liquid
CrysCoat 2147 simultaneously cleans and coats metals such as cold rolled steel, hot-dipped galvanized and aluminum. Its superior cleaning performance makes it applicable in a 3 or 5-stage process.
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Oakite CrysCoat 747 LTS cleans, produces an iron phosphate coating on iron and steel, and prepares aluminum, galvalume, galvanized, galvanneal and other zinc-coated steels for paint.
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Gardobond 1042 is a detergent iron phosphate product used to clean and prepare various metals such as steel, zinc alloys and aluminum for painting.
Form: Liquid
Apply by: Spray
Permatreat 306A is a chlorate-accelerated iron phosphate designed to produce a dense, uniform iron phosphate coating on clean steel substrates. Typical coating weights for this product are 20 to 80 mg/sq ft (0.215 to 0.861 g/m2).
Immersion
Form: Liquid
Approval(s): Federal Specification TT-C-490, Type II
Oakite CrysCoat 187 is a 3-stage iron phosphate material for simultaneous cleaning and phosphating of steel prior to painting.
Form: Liquid
Approval(s): Federal Specification TT-C-490C, Type II, Mil-C-46487, Type I and II (five stages mandatory)
CrysCoat 2187 is designed for use in the third stage of 5-stage pre-paint processes to produce a high performance iron phosphate coating on steel, galvanized steel, galvaneal and aluminum.
Form: Liquid
Approval(s): Federal Specification TT-C-490C, Type II
CrysCoat 747 is a 3-stage iron phosphating material for cleaning/coating mixed runs of steel, aluminum and zinc.
Manual Hot High Pressure or Steam
Form: Liquid
Oakite CrysCoat 2100 SC simultaneously cleans and prepares large parts for painting. The surfactant package has been proven to have superior cleaning properties compared to the manually applied detergent iron phosphates available today.
Form: Liquid
In the same application, CrysCoat 287 SC both cleans and conditions ferrous metal surfaces prior to painting.
Form: Liquid
What makes biodegradable Gardobond A 4961 unique is that it cleans and prepares large parts for painting without a subsequent rinse.
Form: Liquid
Biodegradable Chem Cote 3406 simultaneously cleans and prepares large parts for painting by forming an iron phosphate coating that increases paint adhesion and corrosion resistance.
Spray Immersion
Form: Liquid
Apply by: Spray, immersion
Approval(s): Federal Specification TT-C-490, Type II
Non-detergent Chem Cote 3010 produces an iron phosphate coating on iron and steel.
Form: Liquid
Apply by: Steam gun or hot, high pressure
This fast-acting material effectively removes oils, shop soils and light smuts while developing a conversion coating that improves the adhesion of subsequently applied finishes.
Ferroxphate Coatings
A revolutionary conversion coating technology, Chemetall's ferroxphate coatings provide excellent paint adhesion. Called "ferroxphate" conversion coatings because of the thin, amorphous, iron-rich pre-paint conversion coating that develops on steel substrates, these products perform at near-ambient temperatures. The energy savings often exceeds the cost of the ferroxphate chemical itself.
Our ferroxphate coatings are acidic, liquid products that can be used under powder, liquid, high solids liquid, and electrocoat paints. These non-toxic chemistries can be used with both chrome and non-chrome final seals and contain no heavy metals.
Gardobond A 4920 produces a unique conversion coating on cleaned iron and steel substrates. Although small amounts of aluminum and zinc substrates may be processed with Gardobond A 4920, coatings will not be formed on these substrates.
Gardobond A 4921 is used in the pretreatment of cleaned ferrous, aluminum and zinc substrates.
Gardobond A 4923 both cleans and produces a unique conversion coating on iron, steel, aluminum and zinc substrates. Environmentally friendly, Gardobond A 4923 contains no HAP's, VOC's, or ODC's.
Ferroxphate Related Products
Gardobond Additive H 7384 is a neutral-pH, liquid spray-applied product that supplements the cleaning ability of the low-temperature ferroxphate products.
Cut it, Clean it, Coat it, Control it, with us!
Contact Us
> Find Your Nearest RepresentativeLiterature
For complete access to all product Technical Data Sheets; please log-in or signup for access here.
MSDS Library
To access our Material Safety Datasheets please click here.
If you do not already have a credentials
for access to the MSDS Library please
call us at:
1.800.526.4473 ext. 2355 or
1.908.464.6900 ext. 2355
Titration Procedures
For access to our Titration Procedures, please call us at:
1.800.526.4473 ext. 2355 or
1.908.464.6900 ext. 2355