Home : Products : By Application : Rust Preventives
Chemetall Americas' rust preventives are the best lines of defense against corrosion. We offer short-, mid- and long-term indoor and outdoor protection against moisture and other contaminants, thus prolonging the life of your valued product.
Chemetall Americas provides a complete line of Rust Preventive products to meet all of your corrosion protection requirements. The product you need is here at Chemetall Americas.
Cleaner/Rust Preventive - Water Based
Short Term Indoor Protection: Up to eight weeks rust protection
Form: Liquid
Apply by: Spray
Oakite 443 is an inhibited liquid alkaline spray washing and corrosion resisting compound for steel, aluminum, brass, copper and zinc.
Form: Liquid
Apply by: Spray
When temporary indoor rust inhibition is needed, choose Gardoclean A 5502. It is a cleaner/rust inhibitor designed for in-process metal fabrication operations.
Form: Liquid
Apply by: Spray washer
Cleaner/rust inhibitor for cast iron, designed for in-process metal fabrication operations when temporary indoor rust inhibition is needed.
Form: Liquid
Apply by: Spray, tank
Inpro-Tect 600 is a non-nitrited liquid cleaner/rust inhibitor designed for in-process metal fabrication and heat treating operations. It is a liquid alkaline cleaner that provides dry indoor rust inhibition for up to 10 weeks, depending on conditions.
Form: Liquid
Apply by: Spray, tank
When applied on steel, Oakite NRP leaves a dry film for indoor rust prevention.
Form: Liquid
Apply by: Spray, tank
Specially formulated Oakite CPA is a low-foaming alkaline blend of liquid corrosion inhibitors that protects ferrous metal surfaces from rust without relying on oils or nitrites.
Form: Liquid
Apply by: Spray, immersion
Permatreat NPT610 has the dual ability to be a rust stripper while at the same time inhibiting rust for short term protection following the stripping step.
Form: Liquid
Apply by: Spray, immersion
Water soluble Rustproof 4212 leaves a clear, dry, rust-inhibiting film on steel parts, which provides 2 to 4 months indoor storage protection.
Mid-Term Indoor Protection: Up to 6 months
Form: Liquid
Apply by: Spray, immersion, manual
Oil free Gardotect CP 8040 is a multi-metal safe cleaner/corrosion inhibitor designed to impact a dry-to-the-touch film, while providing superior indoor corrosion protection.
It is a replacement for water and oil-based rust preventives and dramatically extends indoor protection for steel, aluminum and zinc-alloy work pieces without the use of petroleum. The product is an ideal choice after machining, between fabrication and inspection operations, during indoor storage, and while transporting.
Form: Liquid
Apply by: Spray, immersion
At temperatures as low as 16°C (60°F), low-foaming Oakite 398 LT effectively removes fabricating soils on most metals including steel, stainless steel, zinc, copper, brass and magnesium and leaves a temporary corrosion resistant film.
Form: Liquid
Apply by: Spray, tank
Low-temperature, low-foaming solvent emulsion metal cleaner used as low as 16°C (60°F); leaves a temporary corrosion resistant film on ferrous and non-ferrous metals.
Form: Liquid
Apply by: Immersion
Oakite RD 15 is a multi-metal safe, micro emulsion, rust inhibitor/cleaner designed to remove light to moderate soils leaving a dry-to-touch film which provides superior corrosion inhibition as compared to traditional dry-to-touch inhibitors.
Long-Term Indoor Protection: Provides greater than 1 year rust protection
Form: Liquid
Apply by: Dip, brush
Oakite Rust Preventive 1 is an emulsifiable, mildly alkaline material for preventing rust on steel and protecting non-ferrous metal surfaces. It is most effective applied over conversion coatings for long-term protection, and is well suited as the final step in the Oakite CrysCoat-and-Oil process.
Form: Liquid
Apply by: Dip, brush
Oakite Rust Preventive 2 is an emulsifiable, mildly alkaline material for preventing rust on steel and protecting non-ferrous metal surfaces. It is most effective applied over conversion coatings for long-term protection, and is well suited as the final step in the Oakite CrysCoat-and-Oil process.
Form: Liquid
Apply by: Spray, immersion, brush
Approvals: MIL-C16173, Type II
Rustproof 4002 protects steel parts from oxidation and corrosion for up to 5 years when stored indoors and a minimum of 1 year in covered outdoor storage.
Form: Liquid
Apply by: Dip, brush, roll-coat
Designed to provide long-term, indoor rust protection for ferrous and non-ferrous parts, Oakite Ryconox 20M can be applied to parts while they are still wet, eliminating hot rinses or drying operations.
Form: Liquid
Apply by: Dip, brush, non-atomizing spray
Useful for protecting food processing equipment during seasonal shutdowns, Oakite Special Protective Oil is non-emulsifiable, non-staining, and water-displacing. Machined metal parts between operations, finished metal parts, and tools in storage also benefit from its use.
For recommendations for rust preventives offering outdoor protection, please contact your local Chemetall Americas Technical Service Representative.